LINN Selekt DSM Power Amp and Sub Out Cartridge

filler

Price:
Sale priceA$2,495.00
Java Not Enabled

Tax included. 🚚 FREE SHIPPING on all orders

Payment & Security

American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Visa

Description

Power Amp Cartridge 100 Watts @ 4 Ohm plus Sub out

 

SELEKT DSM CARTRIDGE - 1.1 ( Combined power amp / subwoofer line)

This is a module with:

  • single line-level audio channel with 2off RCA sockets sharing the same single feed. (e.g. Subwoofer)

and

  • single Class-D Power Amplifier channel with 4mm/Banana/Binding post terminals. (e.g.Centre channel speaker)

This is designed to work with Selekt Power Amplifer cartridges.
Line Output:

RCA: Output Level: 2V rms @volume 80 Output Impedance: 300Ω

Power Amplifier Output:

Bridged Class-D amplifier with post-filter feedback using 4mm/Banana/binding post terminals.

Max output power:
100W/channel into 4Ω load,
50W / channel into 8Ω load
THD+N: 0.001% Dynamic Range      110dB Gain: 20dz

Note:

  • An upgrade to the Selekt Power supply may be requried to use any new modules.

  • Power Amplifier outputs: These are CLASS-D amplifier outputs and speakers should ONLY be connected/disconnected when the product in is Sleep state or powered OFF.

  • Some Electrostatic speakers may require a modification to work with Linn Selekt Class-D amplifier. Please refer to the speaker manufacturers website for information.

  • The Selekt power amplfiers have a slightly lower gain than other Linn power amplifiers, (Majik/Akurate..). If you are going to Bi-Amp a pair of speakers then we would recommend either ALL Selekt Power amplifier cartridges or ALL Selekt Line level cartridges with external amplifiers.

  • DAC's are sold seperately and ONE DAC module MUST be fitted to the the cartridge to get audio from this cartridge.

  • Different DAC's modules can be used with each Selekt Cartridge.

Either

  • Standard (Level-1) DAC is the standard DAC.

or

  • Katalyst (Level-2) DAC use the higher specification Katalyst DAC Architecture

  • Each DAC module use STEREO DAC IC/chip's. You CANNOT have a Standard and a Katalyst DAC module installed in the same Line-level, Power-amplifier or 1.1 module at the same time.

  • These Standard and Katalyst DAC modules are interchangeable in different cartridges in the same Selekt DSM. This will change the audio performance of that cartridge only.

Payment & Security

Payment methods

American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


Security

Maybe these are what you're looking for?

Your recently viewed item(s)