The music hall mmf-9.3 turntable is a two speed, belt driven audiophile turntable employing the unique triple plinth construction originated by music hall.
music hall’s unique triple plinth construction
one-piece full carbon fiber tonearm
fully adjustable VTA, azimuth, and dampened arm lift mechanism
counterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damper
completely isolated/decoupled DC motor with 33 1⁄3 and 45 rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridge
motor sits on its own resonance damping puck
optional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylus ($1099 value)
the cartridge supplied is properly aligned and mounted
inverted ceramic main bearing for super quiet, fluid operation
non resonant, 1” thick acrylic platter
soft felt platter mat
high quality gold RCA connectors and detachable phono cable
adjustable tip toe feet with anti scratch cups
low noise fully manual belt drive design
built-in round spirit level for proper leveling
dust cover and 45 rpm adaptor included
excellent instruction manual and easy assembly
The distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable. Sorbothane hemispheres separate each of the three platforms and provide additional suspension and vibration damping.
our penultimate turntable
The mmf-9.3 comes in a high-gloss piano black lacquer finish and is available with Goldring Eroica LX cartridge.
|power supply||15V / 0-0.8mA DC
universal power supply
|power connection||100 – 240 Volt
50 or 60 Hz
|standby power consumption||< 1 W|
|speeds||33 1⁄3 & 45 rpm electronic speed change|
|wow and flutter||± 0.10 %|
|speed deviation||± 0.06%|
|rumble max||> – 73 db|
|effective tonearm length||9 in. (230 mm)|
|tonearm weight||250 g (without counterweight)|
|effective tonearm mass||8.5 g|
|product specifications||w18.25″ x d13.25″ x h7.25″|
|weight||40 lbs. pkg.|
Goldring Eroica LX
The Eroica LX is a true audiophile moving coil cartridge which features an advanced pole shoe design using a powerful rare earth Neodymium magnet.
This unique construction allows a shortened magnetic path, which helps reduce the amount of iron in the record cartridge, keeping the weight down to just 5.5 g. Rigidity is also of prime importance and the Pocan body of the cartridge enables it to be clamped solidly to the headshell, keeping energy losses to an absolute minimum. This cartridge uses a Gyger II line contact stylus with a low output which means it must be used with an amplifier which features a dedicated moving coil phono input.
The Eroica LX offers an exceptionally high standard of performance and reliability.
|Frequency Response||20 Hz – 22 kHz 2 dB|
|Channel Balance||within 1 dB @ 1 kHz|
|Channel Separation||better than 25 dB @ 1 kHz|
|Sensitivity||0.5mV 1dB, 1kHz @ 5 cm/sec|
|Static Compliance||30 mm/N|
|Dynamic Compliance @ 10 Hz||18 mm/N|
|Equivalent tip mass||0.35 mg|
|Vertical Tracking Angle||24°|
|Stylus Radius||Gyger II|
|Load Resistance||100 Ω|
|Load Capacitance||100 – 1000 pF|
|Internal Inductance||12 uH|
|Internal Resistance||8 Ω|
|Cartridge Mass||5.5 g|
|Cartridge Mass (inc fixings)||6.6 g|
|Fixing Centre||0.5″ (12.7 mm)|
|Playing Weight||1.5 – 2.0 g (1.7 g nom.)|
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.