Payment & Security
VALHALLA 2 ANALOG INTERCONNECT
The Valhalla 2 Interconnect consists of 10 conductors made from solid, optimized diameter 99.999999% oxygen free copper, each plated with 85 microns of silver. Its surface is highly polished and treated before a precision Dual Mono-Filament wrap is applied. A precision FEP tube is then extruded over each conductor. The ten FEP tubes are then bonded with a proprietary technique to create a tubular interconnect cable, enclosed in two layers of silver shielding. The V2 interconnect is offered with either RCA or XLR HOLO:PLUG® connectors.
V2 is extremely fast, at over 87% the speed of light. It transmits wide bandwidth signals with incredible speed and minimum phase shift. The V2 cable is state of the art, bettered only by the mighty Odin. It delivers incredible transient response and dynamic resolution so that no musical detail is lost. Each Valhalla 2 interconnect cable is hand built in the USA with HOLO:PLUG® RCA phono plugs or HOLO:PLUG® XLR connectors.
|Insulation:||High purity class 1.1 extruded Fluorinated Ethylene Propylene (FEP)|
|Construction:||Mechanically tuned lay, length and Dual Mono-Filament design|
|Conductors:||10 x 24 AWG|
|Material:||Silver-plated 99.999999% solid core OFC|
|Overall Shield Coverage:||97% Total coverage with 2 layers of silver-plated shielding|
|Velocity of Propagation:||87%|
|Termination:||Nordost HOLO:PLUG® Gold Plated RCA or XLR|
VALHALLA 2 REFERENCE CABLES
With their introduction in 2001, Valhalla cables became a benchmark for performance in the consumer electronics industry and a great success for Nordost — but by 2013 it was time for a new Reference range. Over the years we have been able to develop cutting edge production techniques and technological innovations that both improve the quality and precision of our manufacturing process and propel the capabilities of our products to previously unattainable levels. The Valhalla 2 range benefits from the gains of those years of research and development in every aspect of its construction.
While V2 cables remain true to the Nordost design philosophy, using silver-plated, OFC solid core conductors, extruded FEP insulation, a mechanically tuned construction, and asymmetrical grounding, the advances made from that jumping-point are astounding.
V2 cables use Dual Mono-Filament technology, along with an innovative, proprietary connector called the HOLO:PLUG®, designed to be the best possible interface between the cable and component. The combination of these two ground-breaking technologies allows Nordost products to perfectly match our philosophy of low mass design, optimal signal transfer and perfect impedance matching.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.