Make an enquiry
Canor AI 1.20 (Class A) Solid-state Integrated Amplifier
Enquiry Submitted!
Make an Offer
Canor AI 1.20 (Class A) Solid-state Integrated Amplifier
Offer Submitted!
Canor
Slovakia
Canor AI 1.20 (Class A) Solid-state Integrated Amplifier
FREE DELIVERY AUSTRALIA WIDE
Every order ships free to any address in Australia via fully tracked, insured delivery. You’ll receive a tracking link once your order is dispatched so you can follow it the whole way. Estimated delivery is 1-4 business days.
Buy with Confidence Warranty
We handle your warranty so you don’t have to. If something isn’t right, simply get in touch and we will coordinate directly with the Australian importer on your behalf. Find out more. click here to lodge a warranty claim.
7-DAY EXPERT SUPPORT FOR YOUR PEACE OF MIND
Whether you’re browsing or already unboxing, Geoff is your friendly hi-fi guide available 7 days a week. From choosing the right system to setting up your new purchase, expert advice is always within reach. Contact Geoff today.
PRICE MATCH
Price is important, but building the right system synergy is equally so. If you’ve found a better price on one of our products or listings, simply get in touch with Geoff. Don’t let price stand in the way of working with HeyNow Hi-Fi to find the right result for your system.
Description
Canor AI 1.20
Integrated Solid-state Amplifier
PREMIUM LINE
CANOR AI 1.20 is an integrated solid-state amplifier in pure class-A up to 50 W per channel with a relay attenuator with two standalone blocks for each channel.
Highlights
01 Operates in a pure class A
02 264 000 uF of total filtering capacitance
03 Possibility to create a monoblock connection of 2 units
Main Features
Heat disposal
We used a special copper plate for heat dissipation, which is installed on the heatsink and the power transistors are installed directly on the given copper plate.
Dual-mono connection
Dual-mono connection – each channel has its own power transformer. Power transformers are located in separate parts of the device.
Amplifier design
A shielded tunnel passes through the center of the AI 1.20 amplifier, in which filters with nanocrystalline coils are located. In addition, the input circuits are equipped with low-noise J-P transistors.
Monoblock connection
For even better performance and sound, it is possible to connect AI 1.20 as monoblocks using a data cable. One unit becomes the “master” unit and the other the “slave”. This is the so-called bridge connection of two amplifiers (a fully symmetrical connection)
Product features
- An integrated solid-state amplifier in pure class-A up to 50 W per channel
- A relay attenuator with two standalone blocks for each channel
- PCB’s utilize our premium CMT™ technology (CANOR® PCB Milling Technology), it is the way we mill printed circuit boards
- CMT™ technology originated in a long-standing endeavour to improve the sonic performance of our products
- Power supply units with filtered out interfering signals from the mains supply
- Interference-rejection and as small as possible leakage field ensure custom-wound toroidal transformers
- 264 000 uF of filtering capacitance simulates a nearly stabilized supply voltage
- An option of synchronous control enables the use of two amplifiers in a monoblock mode without the need of using an extra preamplifier and that is a Master/Slave mode with an output power of 100W per channel
Tech Specs
| Output power | 2 x 50 W / 4 Ω 2 x 30 W / 8 Ω |
| Gain | -30 dB |
| Inputs sensitivity | 290 mV |
| Frequency range | (20 – 25 000) Hz ±0,5 dB / 5 W |
| Input impedance | 30 kΩ |
| Inputs | 5 x RCA, 2 x XLR (active only in monoblock connection) |
| Total Harmonic Distortion | <0,0009% / 1 kHz, 5 W |
| Signal-to-noise ratio | > 90 dB |
| Filtration capacity | 132 000uF / 35V (per channel) |
| Damping factor at 4 Ω load at the output | 250 (based on measured output impedance) |
| Damping factor at 8 Ω load at the output | 500 (based on measured output impedance) |
| Power | 230 V / 50 Hz / 375 VA |
| Input power | 305 W |
| Dimensions (w x h x d) | 435 x 170 x 485 mm |
| Weight (net) | 28 kg |
| Output power | 2 x 40 W /4,8 Ω – ultralinear 2 x 20 W /4,8 Ω – triode |
| Gain | -30 dB (at 8 Ω) -28 dB (at 4 Ω) |
| Inputs sensitivity | 500 mV |
| Frequency range | (10 – 50 000) Hz ±0,5 dB / 5 W |
| Input impedance | 30 kΩ |
| Inputs | 5 x RCA, 2 x XLR (active only in monoblock connection) |
| Total Harmonic Distortion | <0,05% / 1 kHz, 5 W |
| Signal-to-noise ratio | > 95 dB |
| Filtration capacity | 2200uF / 500V |
| Damping factor at 4 Ω load at the output | 9 (based on measured output impedance) |
| Damping factor at 8 Ω load at the output | 10,5 (based on measured output impedance) |
| Tube complement | 4 x KT88 / 1 x 12AX7 / 2 x 12AT7 |
| Power | 230 V / 50 Hz / 375 VA |
| Input power | 220W |
| Dimensions (w x h x d) | 435 x 170 x 485 mm |
| Weight (net) | 26 kg |
Customer Reviews
User Reviews
Industry Reviews
Warranty Information
We care about your experience with HeyNow Hi-Fi, and we’re here to make the warranty process as smooth as possible.
Your warranty is handled directly by the Australian importer. By submitting this form, we’ll coordinate the process for you and keep you updated every step of the way. Important: Shipping fees are not included as part of your warranty coverage.
If your HeyNow Hi-Fi purchase isn’t working as it should, click here to lodge a warranty claim.
Should you have any questions, feel free to contact us https://www.heynowhifi.com.au//pages/contact
Featured Categories
WHY CHOOSE HEYNOW HI-FI?
At HeyNow Hi-Fi, it's not just about the gear - it's about how it all comes together. With over 30 years of experience, Geoff provides personalised, expert advice to help you build a system that suits your music, your space, and listening style.
Whether you're starting from scratch, refining your set up, or upgrading your gear, Geoff is always happy to have a chat. Call or book a private consultation directly with Geoff today.