Origin Live Swift MK5 Turntable

Swift MK5

The Swift MKV firmly stands on the shoulder's of it's predecessor, The Aurora. Utilising the same groundbreaking technologies while incorporating the newest innovative edition of the multi-layer platter and power supply into it's arsenal. 

The Swift adds the Multi-Layer Platter to the basic design of the Aurora turntable, with its cantilevered design, motor power supply and decoupled arm board. The MLP layers work to diffuse surface resonance in the platter through vibrational interference, resulting in a texture in the music freed from resonant artefacts. This new turntable delivers a performance that surpasses its price point by miles, offering a sure investment for your system.

Features

Mk5 Motor Power Supply

The Mk5 Motor Power Supply introduces a new PCB in the PSU on all decks offering even more speed stability and improved sonic performance than the former Light Speed Controller. Common problems like speed drift, motor jitter and cogging are avoided. Speed settings for 33.33 and 45 RPM are operated through one knob with no need for belt/platter change.

DC100 Motor

These high-grade Swiss motors demonstrate the powerful, smooth-running needed in a good turntable motor. Ironless cores eliminate eddy currents which result in low “clogging”, low vibration and speed stability. Motors are decoupled to minimize vibration and reduce audible noise.

Belt

The belt is manufactured in house using special material which increases grip and reduces stretch under instantaneous loading, using a unique material which dramatically improves on widely used neoprene rubber  – benefits include increased dynamics and deeper bass performance.

Multi Layer Platter

The Multi Layer Platter (MLP) is trickle down tech from our flagship Voyager turntable, featuring an intricately designed top with over 1000 individual slots laser cut through the top layer. Combined with another composite layer underneath and carefully screwed on to the acrylic platter. The MLP layers work to diffuse surface resonance in the platter through vibrational interference, resulting in a texture in the music which is freed up from resonant artefacts.

High Specification Power Supply

Carefully selected cables from premium suppliers are attached to motor circuitry that is designed to ensure the motor, the platter and your vinyl are running smoothly on a consistent power supply.

Standard Armboard

Our standard armboard provides premium performance for the price point. Decoupled from the rest of the turntable, the armboard is balanced in equilibrium with the platter and bearing house.

Pulley

A well researched special plastic pulley enables maximum belt grip, resulting in increased definition and dynamics over.

Ultra-low Friction Bearing

Made in house, the new MK4 bearing has ultra low levels of vibration. The spindle rotates on a Tungsten carbide ball bearing centered on a hardened thrust pad for low friction and long life. Low bearing friction is essential to avoid vibration. Unlike decks which “float” the platter using air or magnetic bearings, we believe “earthing” the energy out of the platter is essential for sound purity.

High Specification Sub-Chassis

The sub-chassis plate balances the armboard with the platter and bearing house, decoupling both from the turntable plinth. Its mass heavy design also helps to effectively damp vibration travelling through the armboard and platter.

Suspension

Our unique suspension avoids both the softening of leading edges often found in suspended designs and the hardness in many non-suspended designs. The results are:

• Superior pitch, rhythm, and timing
• Rock-solid imaging
• Reduced colouration
• Refined presentation of low-level information
• Easy to follow separation in the music and vocals

Options and Extras

12 Inch Armboard

In general, we think that 12″ arms almost always outperform their 9.5″ counterparts. The method commonly employed by other brands, for fitting 12-inch arms is to change the armboard. However, our arm boards are integrated into the structure of the sub-chassis. To accommodate for 12″ arms, we have an option to change the Sub-chassis of the turntable. Only 12-inch Origin Live tonearms will normally fit this option – other 12-inch arm brands can be quoted on a case-by-case basis.

Dual Arm-Board

The dual armboard allows two 9.5″ Origin Live or Rega’s arms to be fitted to the deck. You might want a dual armboard if you:
• If some of your records are dirty or damaged you can play them through a cheap cartridge without needing to change it.
• You may have 2 cartridges for particular applications such as a mono cartridge for mono records.
• If you set up the arms for different record thicknesses it avoids needing to keep adjusting the VTA
• Dealers use them to enable quick comparisons of different tonearms with the same cartridge
If you are considering this option, then it is easier and saves money to order the dual armboard sub-chassis with the deck and not at a later date.

Dust Cover

We do not make or sell dust covers ourselves, but we can make a few recommendations. You can order a bespoke Lid from various online plastic stores, This is a good idea if you have young children or pets and need a completely enclosed solution. If however you just need to keep dust off the platter and arm then the Michell Unicover will usually suffice.

Compare Turntable Features

User Reviews

2 Years Warranty

We care about your experience with HeyNow Hi-Fi, and we’re here to make the warranty process as smooth as possible.

Your warranty is handled directly by the Australian importer. By submitting this form, we’ll coordinate the process for you and keep you updated every step of the way. Important: Shipping fees are not included as part of your warranty coverage.

If your HeyNow Hi-Fi purchase isn’t working as it should, click here to lodge a warranty claim.

Should you have any questions, feel free to contact us https://www.heynowhifi.com.au//pages/contact