Make an enquiry

Siltech Signature SAGA C1+V1+P1

Siltech Signature SAGA C1+V1+P1

$187,940.00

Enquiry Submitted!

Thank you for your enquiry! We've received your submission and will review it shortly. We'll get back to you within 24 hours.

Make an Offer

Siltech Signature SAGA C1+V1+P1

Siltech Signature SAGA C1+V1+P1

$187,940.00
$

Offer Submitted!

Thank you for your offer! We've received your submission and will review it shortly. We'll get back to you within 24 hours.

Siltech Signature SAGA C1+V1+P1
Siltech Signature SAGA C1+V1+P1
Siltech Signature SAGA C1+V1+P1
Siltech Signature SAGA C1+V1+P1
Siltech Signature SAGA C1+V1+P1
Siltech Signature SAGA C1+V1+P1
Siltech Signature SAGA C1+V1+P1
Siltech Signature SAGA C1+V1+P1

Siltech

Country of origin: Netherlands

Siltech Signature SAGA C1+V1+P1

Sale price$187,940.00

Includes GST. 🚚 Free shipping on orders over $100 Australia wide at checkout.

Best for:

  • Reference-level source control preserving delicate musical signals with zero-feedback tube architecture.
  • Dead-silent operation powered by a dedicated internal battery supply completely isolated from mains interference.
  • Uncolored signal routing utilizing ultra-short signal paths and S10 monocrystal silver internal wiring.
  • Discerning audiophiles seeking effortless dynamics, micro-detail, and natural vocal realism.
  • Complete SAGA chains serving as the precision command center for the V1 and P1 amplifiers. [1]

The Siltech Signature SAGA C1+V1+P1 brings together three reference components: the C1 Preamplifier, V1 Interstage Amplifier and P1 Power Amplifier. Designed to work as a complete amplification system, this combination focuses on exceptional transparency, dynamic authority and musical realism, revealing recordings with remarkable detail and precision.

In stock
Colour:Silver

Every order ships free to any address in Australia via fully tracked, insured delivery. You’ll receive a tracking link once your order is dispatched so you can follow it the whole way. Estimated delivery is 1-4 business days.

We handle your warranty so you don’t have to. If something isn’t right, simply get in touch and we will coordinate directly with the Australian importer on your behalf. Find out more. click here to lodge a warranty claim.

Whether you’re browsing or already unboxing, Geoff is your friendly hi-fi guide available 7 days a week. From choosing the right system to setting up your new purchase, expert advice is always within reach. Contact Geoff today.

Price is important, but building the right system synergy is equally so. If you’ve found a better price on one of our products or listings, simply get in touch with Geoff. Don’t let price stand in the way of working with HeyNow Hi-Fi to find the right result for your system.

Description

Siltech's Statement Amplifier

Throughout Siltech’s near four decade long life, our focus has been to make products that take you closer to your favourite recordings, unlocking them before your very ears. Of course, much of our work has been on cables – as these can have a highly deleterious effect on a system’s sound. But we’ve also undertaken two very special projects, the Symphony loudspeaker and the SAGA amplifier seen here.

Siltech’s Structural Amplifier Gain Architecture is a radically different design approach to amplifying sound; the object being to lose as little as possible of the original signal, whilst adding nothing. In order to do this, our engineers studied the ways that amplifiers can damage the precious musical signals they’re asked to apply gain to. They then deployed their unique approach, honed from developing some of the world’s finest cables, to the task of designing the finest amplifier system on sale today.

Design matters

Throughout the development of the SAGA system, Siltech engineers used advanced physical modelling – implementing NASA-awarded Comsol advanced multi-physics programming. This helped us get a better understanding of how to minimise noise and distortion in the circuitry, and fashion the architecture accordingly. The result was a three-way split between the C1 line-stage preamplifier, V1 voltage gain interstage amplifier and P1 power amplifier.

Together, the SAGA system (C1, V1 and P1) is quite unlike any conventional amplifier. The design physically separates the line, voltage and current gain stages, for the lowest possible distortion and the minimum signal loss. This confers a number of benefits, such as enabling the use of tubes and a battery power supply in the C1 – which broadens the dynamic range, whilst keeping the ultra sensitive low voltage circuits away from noisy AC mains.

The V1 interstage amplifier works with either a single P1 power amplifier, or a pair. The former uses tubes to complement the latter’s mighty solid-state output stage, which puts out a redoubtable 350W RMS per channel into 8 ohms and twice that into 4, with no overall feedback.

Power play

As with all Siltech cables, the key design criterion for the SAGA amplifier was the minimising of electrical, electrostatic, electromagnetic and mechanical noise going into the amplifier. That’s why it employs two unusual approaches to power management…

Live and direct

Incoming AC mains noise wreaks havoc with the sensitive circuits of any high end amplifier, as does that created by its own power transformers and power supply components. That’s why both the C1 preamplifier and V1 interstage amplifier run off batteries – giving a pure, noise-free direct current supply. Siltech’s solution involves smart-controlled rechargeable cells, which drive specially selected ultra low noise tubes. The result is an eerily quiet amplifier that never smears subtle musical cues.

Light fantastic

The P1 power amplifier requires a super clean high current power supply to turn the low voltage line level music signal into hundreds of watts of output power. To do this, Siltech designed the Apollo Light Drive. A super-strong AC-powered light source is used to drive a photo-electric cell, giving a totally noise-free, galvanically isolated DC output. This then drives the amplifier’s output stage, keeping it absolutely immune from mains-born distortion. The idea behind this is not new, but its execution in a high powered amplifier is extremely challenging. The result is ultra-clean, low distortion power – and lots of it.

Come together

As well as its novel modular design, the SAGA system naturally employs Siltech best practices. Component quality is cost-no-object, and internal wiring is of course our unsurpassed S10 monocrystal silver. Materials such as Kapton and PEEK feature in the cable dielectrics. Signal paths are as short as possible, and the vacuum tubes in the C1 and V1 are specially selected.

Working together, the C1, V1, and P1 deliver vanishingly low distortion allied to immense dynamic swings on musical crescendos – the result is an enormous 145dB dynamic range. When the V1 interstage amplifier is mated to twin P1 power amplifiers, loudspeakers can be bi-amplified for an even more significant effect. Either way, the result is a spectacularly musical sound, totally unfettered by the usual issues that plague traditional designs.

Tech Specs

Total Bandwidth

Greater than 100 kHz, volume control at any position

THD

Less than 0.01%, 2nd harmonic only, 1 Hz–100 kHz / 1W

Dynamic Range

128 dB

Damping Factor

100 @ 10 Hz–20 kHz (8 ohms)

Power Output (8 Ohms)

380W RMS

Power Output (4 Ohms)

760W RMS

Power Output (2 Ohms)

1250W RMS

Minimal Load

2 Ohms

Customer Reviews

User Reviews

Industry Reviews
Warranty Information
warranty shield 5 Years Warranty

We care about your experience with HeyNow Hi-Fi, and we’re here to make the warranty process as smooth as possible.

Your warranty is handled directly by the Australian importer. By submitting this form, we’ll coordinate the process for you and keep you updated every step of the way. Important: Shipping fees are not included as part of your warranty coverage.

If your HeyNow Hi-Fi purchase isn’t working as it should, click here to lodge a warranty claim.

Should you have any questions, feel free to contact us https://www.heynowhifi.com.au//pages/contact

WHY CHOOSE HEYNOW HI-FI?

At HeyNow Hi-Fi, it's not just about the gear - it's about how it all comes together. With over 30 years of experience, Geoff provides personalised, expert advice to help you build a system that suits your music, your space, and listening style.

Whether you're starting from scratch, refining your set up, or upgrading your gear, Geoff is always happy to have a chat. Call or book a private consultation directly with Geoff today.

GET IN TOUCH