Make an Offer
Unison Research Phono One Phonostage
Offer Submitted!



Unison Research Phono One Phonostage
Power Supply
Unison Research Phono One Phonostage
Cherry / with Power Supply
22 Saint Kilda Road
22 Saint Kilda Road
Suite 2.02
St Kilda VIC 3182
Australia
Unison Research
uPhono+
MM / MC Phono Pre-amplifier w/Volume Control, Headphone Amplifier & Analog to Digital Converter with Digital Outputs. A veritable Swiss knife of functionality. Features two on-board linear power supplies; one powering the analog section and one powering the digital section. No external wall-wart power supply here.uPhono+ Analogue Features
- Moving Magnet (MM) stage gain: 38dB @ 1kHz
- Moving Coil (MC) stage gain 58dB or 69dB @ 1kHz selectable with dip-switches
- MM cartridge input with 4 loading capacitor values (100/200/320/420pF) selectable with dip-switches
- MC cartridge input with 7 loading resistor values (5/10/25/100/250/500/1kOhm) selectable with dipswitches
- Fixed level analogue output
- Variable level analogue output: level varied with front panel volume control
- High-current headphone stage: can be used with headphones from 16 to 600 ohms impedance
- Subsonic IEC anti-rumble filter with override dip-switch
- Optimized PCB layout and widespread use of SMD componentry to minimize the length of the signal path
- Alps® «Blue Velvet» potentiometer that simultaneously adjusts the volume of the headphone stage and the level of the variable output
- Low noise internal mains power supply with totally independent analogue and digital power supplies
uPhono+ Digital Features
- USB 24bit/96kHz max. sample rate to record your vinyl discs on PC and save them in
high-resolution formats - Toslink (96kHz) digital optical output
- S/PDIF (96kHz) digital coaxial output
- A/D conversion carried out using the Cirrus Logic CS5341 IC
- USB asynchronous transmission using the Bravo SA9137 IC
- Digital optical and coaxial transmission using the TI DIT4096 IC
|
Type |
Stereo phono tube preamplifier |
|
Class |
Pure A |
|
RIAA |
passive +/- 0.1 dB (20 Hz / 20 KHz) |
|
Output Impedance: |
800 ohms |
|
Outputs: |
1 x line |
|
Gain: |
54dB |
|
Total harmonic distortion (THD) |
0.1% for 1 volt output |
|
Signal to Noise Ratio (S/N) |
–80 dB |
|
Inputs |
1 for MM or MC phono valve |
|
Input impedance |
47 Kohm – 100 – 50 – 22 ohm / 100 – 200 – 320 – 420 pF (modifiable) |
|
Feedback factor |
0 dB. |
|
Valves |
5 x ECC83 / 12AX7 |
|
Power supply |
External |
|
Dimensions |
37.3 x 5.84 xh 24.63 cm. |
|
Weight |
Approximately 3.6 kg (including external power supply) |
User Reviews
All warranties are handled by the Australian importer - by filling in this form we will coordinate with you and the importer to get your product fixed.
Please note shipping costs are not covered by warranty.
If your product that you’ve purchased from HeyNow Hi-Fi has failed - click this link to file a warranty claim.

